Rechercher

Catégories

Contact

Tél : 05 61 68 85 49

Formulaire de contact

Fabricants

Nouveaux produits

New Audio Technica AT2022 Agrandir l'image

Audio Technica AT2022

Audio Technica 2022

Plus de détails

190,00 € TTC


    Audio Technica 2022



    X/Y Stereo Microphone

    The AT2022 is a condenser microphone designed for stereo recording. Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90°) or wide (120°) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of a live sound field. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug.



    X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility

    Provides the spatial impact and realism of a live sound field

    Battery operation allows use with most recording devices

    Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise

    User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns

    FREQUENCY RESPONSE
    ELEMENTSFixed-charge back plate, permanently polarized condenser
    POLAR PATTERNX/Y Stereo
    FREQUENCY RESPONSE20–20,000 Hz
    LOW FREQUENCY ROLL-OFF150 Hz, 6 dB/octave
    OPEN CIRCUIT SENSITIVITY-41 dB (8.9 mV) re 1V at 1 Pa
    CHANNEL BALANCE<2.5 dB
    IMPEDANCE200 ohms
    MAXIMUM INPUT SOUND LEVEL122 dB SPL, 1 kHz at 1% T.H.D.
    DYNAMIC RANGE (typical)103 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO75 dB, 1 kHz at 1 Pa
    BATTERY TYPE1.5V AA/UM3
    WARNING: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.
    BATTERY CURRENT / LIFE1.2 mA / 500 hours typical (alkaline)
    SWITCHOff, on/flat, on/roll-off
    WEIGHT270 g (9.5 oz)
    DIMENSIONS192.0 mm (7.56") long,
    65.0 mm (2.56") maximum head diameter,
    21.0 mm (0.83") body diameter
    OUTPUT CONNECTORIntegral 3-pin XLRM-type
    CABLE0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end
    ACCESSORIES FURNISHEDAT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch

    POLAR PATTERN
    POLAR PATTERN
    8 kHz in 90-degree position
    POLAR PATTERN
    POLAR PATTERN
    200 Hz in 90-degree position
    POLAR PATTERN
    FREQUENCY RESPONSE

9 autres produits dans la même catégorie :